Advanced Material Handling Ltd submerged bottom ash conveyor. This conveyor engineered and designed for installation below a mass burn boiler in a waste to energy facility located in the USA. Our conveyor is equipped with case hardened 22x86MM mining chain and single bolt shackles. This chain is a double strand assembly with 1 "x 32" T100 abrasion resistant steel attachments. Our sprockets are 10 tooth split replacement style. Take-up system has (2) Royal air cylinders for constant take-up pressure at 250 PSI. The chain return rails are made from abrasion resistant AR400 plate and are designed to be bolt on replacement style. The conveyor chain is designed to transport ash at 14 feet per minute and dewater the ash as it transports up the incline. The chain is driven by a SM Cylco gear box with 195:1 reduction and a 7.5 HP Baldor motor with a 160 shear pin sprocket. Not shown in the video is the 60 feet of incline section as it was not practical for assembly testing. If you require any further information please contact Advanced Material Handling 604-556-0881 or visit our website at www.advancedmaterial.ca
Be sure and check out all the videos and information on Material Handling Videos.
No comments:
Post a Comment